Yamaha YH-E700A review (2024)

Yamaha has roots in music stretching back to the nineteenth century. To say the manufacturer of headphones, synthesizers, home theatres, motorcycles, and more knows a thing or two about music (and noise—I’m looking at you, dirt bikes) would be a gross understatement. With opaque terminologies like “Listening Care” and “Listening Optimizer,” how does the active noise canceling (ANC), and audio of the Yamaha YH-E700A ultimately shake out?

It performs about average for heat retention, and feels cozy after three hours of sitting down, but it does little to disperse heat if you do anything physical or you’re in a hot climate.

The padding on the ears is quite large, and the space within which you fit your ears is about 58mm by 60mm. The grip is good enough for walking around, but it’s too loose for anything physically rigorous. Personally, I find it comfortable, though somewhat cramped for one of my ears. This medium-to-light grip makes sense for the flight Yamaha anticipates you’ll take the YH-E700A on, given its included airplane adapter.

An unorthodox fold helps keep the case footprint smaller.

The case looks a bit like a kidney bean with an unusual placement—a half fold basically. Luckily, Yamaha includes a diagram affixed to the inside of the zip case, because it’s a little fiddly, even if it does make things more compact. It’s worth the fussing to save space in your backpack, and you’ll get used to the configuration.

Interestingly, the manual available through the app and via a QR code on the start-up sheet lacks some prudent user tips. It doesn’t even explain what the headphones’ different lights indicate. I recommend sticking to the paper copy which is much more informative.

How to control the Yamaha YH-E700A

The majority of the controls reside on the right ear cup.

Besides a button on the left headphone to cycle through active noise canceling (ANC), Ambient Sound, and standard listening, all other buttons are on the right ear cup. Volume and track skipping share the same two buttons on a long plastic strip, while pause/play/answer call/end call/voice assistant are on another button. Finally, on the right ear cup towards the very front, you’ll find power and Bluetooth pairing shared with a single button.

All buttons work as intended, except quite often when one goes to Bluetooth pair, which requires holding the button down for about 5 seconds, the headset turns off instead. There’s a narrow difference in timing between Bluetooth pairing mode and power off, which is really annoying.

It takes a little practice to memorize each button’s location. Yamaha could take a cue from the House of Marley Positive Vibration XL ANC’soversized and rubberized buttons, which feel distinctly different for quick controls.

Should you download the Headphone Controller app?

The app is the only way to access Listening Care and Listening Optimizer.

Yes, grab the Yamaha Headphone Controller app. Although it is limited in depth, you have to use it to access updates. In order to access it, you have to sign away some of your data. Once you’ve done so, the app works mainly on a single screen with buttons to select ANC, standard mode, or Ambient Mode. There’s no adjustability in ANC.

The bigger mystery only accessible in the app is “Listening Care” and “Listening Optimizer”—both of which are activated by default. Listening Care operates as a kind of AI adaptive four-band equalizer. Yamaha’s description seems to suggest it’s meant to avoid auditory maskingso you can listen at safe volumes. In action, it reminds me of the loudness button on 1990s stereos. Usually, it just makes the bass and treble louder. I’d prefer a traditional equalizer.

Turning up the bass seems to be the main function of Listening Care and Listening Optimizer.

Listening Optimizer functions through a combination of hardware and software. Microphones in the ear cups measure your individual fit every 20 seconds and the software makes adjustments to the audio to “optimize” it.

For the most part, I don’t notice a major difference with it on or off, although I can manage to trick it to get an idea of what it does. Take off the headphones for over 20 seconds while playing a song and when replacing the headset the audio will sound significantly more bassy. It later readjusts. This makes sense because bass tends to be the first set of frequencies to not make it to your ears when you have a poor fit. So, if the headphones aren’t covering any ears, it boosts the bass even more. I leave the function off. Like most Adaptive Sound features it does not necessarily improve the musical experience.

What Bluetooth codecs does the Yamaha YH-E700A use?

If all else fails, just plug it in.

In use, there are no signal dropouts across a distance of 20 feet (6m) or so with walls. Of course, you can always plug in with the 3.5mm connector for the best quality audio.

How long does the battery last on the Yamaha YH-E700A?

You won’t be caught without audio with the YH-E700A’s long battery life, headphone cable, and USB-C charging cable on hand—oh, and flight adapter.

Yamaha claims the headset has up to 35 hours of battery life. With ANC on, we found the Yamaha YH-E700A lasts 23 hours, 35 minutes according to our standardized test—a long way short of Yamaha’s numbers.

Regardless, 23 hours, 35 minutes is enough to survive any listening session you have in mind. I manage a week before recharging, but that all depends on the volume of your listening sessions and duration. It takes three and a half hours to fully recharge the headset from zero juice via the included USB-C cable.

How well does the Yamaha YH-E700A block out noise?

You might as well turn off ANC and save your battery. In contrast, the isolation performs reasonably well.

More on this later, but when you switch on the ANC, the headset’s frequency response changes too. Bizarrely, it cranks up the sub-bass and turns down the volume from 100Hz and 400Hz. It almost makes me wonder if this is a ploy to make you think it cancels noise better than it actually does, by upping the sub-bass to mask external low sounds.

How does the Yamaha YH-E700A sound?

The pink line represents our target curve, and cyan represents the YH-E700A when ANC is powered on. Unfortunately, the volume drops off where a lot of music fundamentals reside in this mode.

We also note that switching on ANC introduces what looks like ringing in the frequency domain on the right channel between 100Hz and 800Hz, as well as higher distortion on the right channel. Yamaha assured us that our sample is working correctly.

The Yamaha headset’s result is the cyan line and our ideal is in pink. Notice the decrease in sub-bass and increase in volume 200 to 700Hz.

Considering most listeners buy a noise canceling headset for its ANC properties, the ANC frequency response chart is the one used for sound quality scores in this review. With ANC off, sub-bass is reduced and the volume dip between 100Hz and 400Hz found in the ANC frequency response disappears. Instead, you get a volume bump between 200Hz and 700Hz.

The YH-E700A measures pretty close to our ideal in the high range, though when this gets paired with an exaggerated low end (like in ANC mode) it leads to a slightly quiet high end by comparison. The representation in the high end itself sounds basically good.

Lows, mids, and highs

The comfort level is pretty good for long sessions and the adjustability means it ought to sit well on most people.

Listening to Darker Place – Joe Goddard Remix, Radio Edit by Rachel Chinouriri with ANC on the good amount of sub-bass emphasis works well with the inherent deep oomph of the song. Interestingly, switching to noise canceling off yields even more oomph because the dip between 100Hz and 400Hz is replaced by the bump at 200Hz and 700Hz. Here the initial attack of kick drums and bass has more volume filling out the song better.

Chinouriri’s whisper-like vocals come through more or less the same in both modes. The deeper backing vocals, however, decrease in volume in the chorus with ANC on. Neither mode suits the song especially well. ANC mode carves out 100Hz to 400Hz in volume and it’s noticeable, while no mode turns up 200Hz to 700Hz a bit too loudly. It’s not awful, and the reproduction in the highs is quite pleasant with the slight under-emphasis (relative to our ideal) meaning you don’t get piercing treble.

Jasper Lastoria / SoundGuys

The ANC button resides on the left ear cup.

Toggling the “Listening Care” setting on and off in the app introduces way too much sub-bass, regardless of ANC or standard listening mode. If the goal of Listening Care is to prompt listeners to keep the headset at a safe volume, it works by turning up the bass way too much. This will make you want to turn it down globally.

This mic distinctly under-emphasizes high frequencies.

Even so, in reverberant spaces, it performs well at transmitting the sounds spoken even if it still picks up the reverberation. In the office, the mic picks up everything from keystrokes to background music. Street noise is a mixed bag: it captures the noise, but your voice remains mostly intelligible. Some headsets go too far in the noise rejection direction and end up cutting out your voice too. You don’t have to worry about that here.

Yamaha YH-E700A microphone demo (Office):

Yamaha YH-E700A microphone demo (Street):

Should you buy the Yamaha YH-E700A?

It’s portable but not without frustrations.

The YH-E700A has some quirks, but for those who enjoy a reasonably comfortable headset with some bassy options and a pretty decent treble frequency response, it could be a winner. The unusual, and welcomed, inclusion of aptX Adaptive favorably rounds out the package for Android users.

Given that it often sells for quite a bit less than its MSRP, it’s a pretty good choice on sale, so long as you temper expectations. While the ANC is pretty useless, the isolation is okay. One significant quibble with the YH-E700A is the alteration to the frequency response when ANC is on versus off.

Just because you want to cancel noise, doesn't mean you also want to change your music from 700Hz and below.

Meanwhile, the Listening Optimizer and Listening Care modes could be replaced with something more useful like an equalizer, especially considering the lack of control users have over the frequency response that changes with ANC. On the other hand, it generally sounds alright in standard mode and once you master quirks like pairing and learning to turn off most functions, it’s a decent headset. Just pretend it doesn’t come with ANC.

Yamaha YH-E700A

Yamaha YH-E700A

aptX Adaptive, AAC, SBC • Wired option • Comfortable for most

MSRP: $199.95

For most listeners, the YH-E700A offers decent comfort, stable connectivity, and aptX Adaptive. Odd is the tendency for almost every function to alter the frequency response. The ANC is disappointing, especially for the price.

See price at Amazon

What are some alternatives to the Yamaha YH-E700A?

The QuietComfort 45 looks nearly indistinguishable from the QC 35 II.

For a more predictable and far better noise canceling experience, pick up the Bose QuietComfort 45. With the updated Bose Muse app you can adjust the EQ so the sound more closely follows our house curve. For Apple users, it’ll perform about the same using AAC codec, while the lack of aptX means Android users have to make do with possibly worse latency than the YH-E700A. On the other hand, the ANC blows the YH-E700A away.

Android users seeking to use aptX and ANC can still pick up the Sony WH-1000XM3 at a discount, now that the WH-1000XM4 is out. While the Sony WH-1000XM4 is a great choice as well, it ditched the aptX codec sticking with LDAC, and has better noise canceling at a price.

For a more wallet-friendly alternative, consider the Sennheiser PXC 550-II. It punches above its price tag with aptX and aptX Low Latency to suit Android users. While ANC has been surpassed by newer headsets, it still silences more low-end than the Yamaha YH-E700A.

Frequently asked questions about the Yamaha YH-E700A