- parametric-filter Amplifiers
- parametric-filter Audio
- parametric-filter Battery management ICs
- parametric-filter
- parametric-filter DLP products
- parametric-filter Data converters
- parametric-filter
- parametric-filter Interface
- parametric-filter Isolation
- parametric-filter
- parametric-filter
- parametric-filter Motor drivers
- parametric-filter Power management
- parametric-filter
- parametric-filter Sensors
- parametric-filter
- parametric-filter Wireless connectivity
- parametric-filter
- parametric-filter
- parametric-filter DC/DC power modules
- parametric-filter DDR memory power ICs
- parametric-filter Gate drivers
- parametric-filter
- parametric-filter LED drivers
- parametric-filter
- parametric-filter MOSFETs
- parametric-filter Multi-channel ICs (PMICs)
- parametric-filter Power over Ethernet (PoE) ICs
- parametric-filter Power stages
- parametric-filter Power switches
- parametric-filter Power-supply filter ICs
- parametric-filter Sequencers
- parametric-filter
- parametric-filter
- parametric-filter Voltage references
Home
Power management
30-V, 1-A, 500KHz current mode PWM controller with 8.4V/7.6V UVLO 100% duty cycle 40°C to 85°C
Data sheet
- document-pdfAcrobat UCx84xA Current-Mode PWM Controller datasheet (Rev. G) PDF | HTML
UC2843A
Product details
- Optimized for Off-Line and DC-DC Converters
- Low Start-Up Current (< 0.5 mA)
- Trimmed Oscillator Discharge Current
- Automatic Feedforward Compensation
- Pulse-by-Pulse Current Limiting
- Enhanced Load Response Characteristics
- Undervoltage Lockout With Hysteresis
- Double Pulse Suppression
- High-Current Totem Pole Output
- Internally-Trimmed Bandgap Reference
- Up to 500-kHz Operation
- Create a Custom Design Using the UCx84xA With the WEBENCH Power Designer
- Optimized for Off-Line and DC-DC Converters
- Low Start-Up Current (< 0.5 mA)
- Trimmed Oscillator Discharge Current
- Automatic Feedforward Compensation
- Pulse-by-Pulse Current Limiting
- Enhanced Load Response Characteristics
- Undervoltage Lockout With Hysteresis
- Double Pulse Suppression
- High-Current Totem Pole Output
- Internally-Trimmed Bandgap Reference
- Up to 500-kHz Operation
- Create a Custom Design Using the UCx84xA With the WEBENCH Power Designer
The UCx84xA family of control devices is a pin-for-pin compatible improved version of the UCx84x family. Providing the necessary features to control current-mode or switched-mode power supplies, this family of devices has many improved features: startup current is less than 0.5 mA, oscillator discharge is trimmed to 8.3 mA, and during UVLO, the output stage can sink at least 10 mA at less than 1.2 V for VCC over 5V.
The UCx84xA family of control devices is a pin-for-pin compatible improved version of the UCx84x family. Providing the necessary features to control current-mode or switched-mode power supplies, this family of devices has many improved features: startup current is less than 0.5 mA, oscillator discharge is trimmed to 8.3 mA, and during UVLO, the output stage can sink at least 10 mA at less than 1.2 V for VCC over 5V.
Similar products you might be interested in
Compare alternates
Drop-in replacement with upgraded functionality to the compared device
Pin-for-pin with same functionality to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 11Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | UCx84xA Current-Mode PWM Controller datasheet (Rev. G) | PDF | HTML | 12 Jul 2022 |
Application note | Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps (Rev. A) | PDF | HTML | 11 Jun 2021 | |
Application note | Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) | 12 Mar 2019 | ||
Application note | UCC38C42 Family of High-Speed BiCMOS Current-Mode PWM Controllers | 07 Feb 2002 | ||
Application note | DN-26 UC3842A Low-Cost Start-up and Fault Protection Circuit | 05 Sep 1999 | ||
Application note | DN-27 UC1842/UC1842A Family - Summary of Functional Differences | 05 Sep 1999 | ||
Application note | DN-29 UC3842A Family - Frequency Foldback Technique Provides Protection | 05 Sep 1999 | ||
Application note | DN-30 Programmable Electronic Circuit Breaker | 05 Sep 1999 | ||
Application note | DN-40 The Effects of Oscillator Discharge Current Variations on Maximum Duty | 05 Sep 1999 | ||
Application note | DN-42A Design Considerations for Transitioning from UC3842 to the New UCC3802 | 05 Sep 1999 | ||
Application note | U-111, Practical Considerations in Current Mode Power Supplies | 05 Sep 1999 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Simulation model
UCC28C43 PSpice Transient Model
SLUM033.ZIP (101 KB) - PSpice Model
Simulation model
UCCx8C43 Unencrypted PSpice Transient Model
SLUM521.ZIP (4 KB) - PSpice Model
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
PDIP (P) | 8 | Ultra Librarian |
SOIC (D) | 8 | Ultra Librarian |
SOIC (D) | 14 | Ultra Librarian |
TI's Standard Terms and Conditions for Evaluation Items apply.
Ordering & quality
Add a quantity to your cart and begin the checkout process to view the options available to select lot or date codes from existing inventory.
Learn more
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.
Video series
View all videos